Wbm2009v2/TestScenarios
From Hackerspace Brussels
Parent: Wbm2009v2
Contents |
[edit] Test 0: Bitrate fixing in Adhoc
- test with one or more foneras to fix the bitrate at 54MBPS to see where the node dissassociate from each other.
- Iperf and ping recommended
[edit] Test 1: Interference in 2.4Ghz
- Use 4 mobile foneras over 2 bridges (use plastic bags for the rain), 2 on channel 1 and 2 on channel 14.
- Generate some continuous traffic with iperf to see if the transfer is being perturbated by the nodes emitting on the other channel.
- Log the results of iperf somewhere on the jffs2 flash
- Try to use a long cable (more then 5 meters) to see if the distance between the nodes plays a role
- Try with channel 1 throughput alone, then power up the other 2 nodes on channel 14 to see if there is interference
- Try with difference distances (1m, 2m, 5m, 10m, or more)
[edit] Test 2: Dual channel in 2.4Ghz
- Use 8 foneras over 4 bridges (use plastic bags for the rain), 4 on channel 1 and 4 on channel 14.
- Generate some continuous traffic with iperf to see if the transfer is being perturbated by the nodes emitting on the other channel.
- Log the results of iperf somewhere on the jffs2 flash
- Try to use a long cable (more then 5 meters) to see if the distance between the nodes plays a role
- Try with channel 1 throughput alone, then power up the other 2 nodes on channel 14 to see if there is interference
- Try with difference distances (1m, 2m, 5m, 10m, or more)
- Use babel version of WBMv1
- Use experimental patches for BATMAN (Marek?)
- Need infos from wprobe about modulation
- iwlist interface + iwlist peers?
[edit] Test 3: Dual channel in 2.4Ghz+5ghz
- Same test as before, but with half of the nodes in 5ghz
- Use 8 foneras over 4 bridges (use plastic bags for the rain), 4 on channel 1 and 4 on channel 14.
- Generate some continuous traffic with iperf to see if the transfer is being perturbated by the nodes emitting on the other channel.
- Log the results of iperf somewhere on the jffs2 flash
- Try to use a long cable (more then 5 meters) to see if the distance between the nodes plays a role
- Try with channel 1 throughput alone, then power up the other 2 nodes on channel 14 to see if there is interference
- Try with difference distances (1m, 2m, 5m, 10m, or more)
- Use babel version of WBMv1
- Use experimental patches for BATMAN (Marek?)
- Need infos from wprobe about modulation
- iwlist interface + iwlist peers?